-2%
,

Radial HotShot ABo – Balanced Output Selector


Radial HotShot ABo – Balanced Output Selector 平衡輸出腳踏開關選擇器HotShot ABo 是一款鎖定腳踏開關,可在舞台上採用平衡輸入並在兩個不同的目的地之間切換,無需任何電源即可操作。

  • 全系列公司貨、享保固
  • 實體門市 / 網路同步銷售
  • 專業錄音室及音樂製作工程人員詢問
  • 門市提供免費試聽服務

NT$5,100 NT$5,200

Compare

Radial HotShot ABo – Balanced Output Selector

平衡輸出腳踏開關選擇器

If you’re a singer who performs anywhere outside the studio, a hand-held dynamic microphone is usually your best choice for rugged, reliable, consistent sound.

HotShot ABo 是一款鎖定腳踏開關,可在舞台上採用平衡輸入並在兩個不同的目的地之間切換,無需任何電源即可操作。

If you’re a singer who performs anywhere outside the studio, a hand-held dynamic microphone is usually your best choice for rugged, reliable, consistent sound.

  • 將平衡信號重定向到兩個不同的目的地

If you’re a singer who performs anywhere outside the studio, a hand-held dynamic microphone is usually your best choice for rugged, reliable, consistent sound.

  • 使用鎖定腳踏開關切換輸出或靜音

If you’re a singer who performs anywhere outside the studio, a hand-held dynamic microphone is usually your best choice for rugged, reliable, consistent sound.

  • 可選輸出焊盤以匹配信號電平

If you’re a singer who performs anywhere outside the studio, a hand-held dynamic microphone is usually your best choice for rugged, reliable, consistent sound.

  • 完全被動操作,無需電源

If you’re a singer who performs anywhere outside the studio, a hand-held dynamic microphone is usually your best choice for rugged, reliable, consistent sound.

在舞台上重新路由信號

If you’re a singer who performs anywhere outside the studio, a hand-held dynamic microphone is usually your best choice for rugged, reliable, consistent sound.

Hotshot ABo 採用平衡 XLR 輸入,並提供使用舞台上的無源腳踏開關在兩個目的地之間切換信號的能力。這使其成為各種應用的理想選擇,包括在混音台上驅動兩個通道以實現乾濕效果路由,將動態麥克風從 PA 系統轉移到監視器或對講系統,或在咳嗽時暫時靜音信號。ABo 使用鎖定腳踏開關,因此它會保持在最後選擇的輸出上,直到您再次按下腳踏開關。

粉絲頁直接詢問 :

反拍樂器 FB

回首頁

If you’re a singer who performs anywhere outside the studio, a hand-held dynamic microphone is usually your best choice for rugged, reliable, consistent sound.

貨號: 11801028 分類: ,
規格
音頻電路類型: 被動,真正的旁路
頻率響應: 20Hz ~ 20kHz
動態範圍: 無限
特徵
輸入墊,接地提升
輸入連接器: 1 個 XLR 輸入
輸出連接器: 兩個 XLR 輸出
一般的
建造: 14號鋼
尺寸(長 x 寬 x 深): 3.9" x 3.6" x 2" (99 x 92 x 51mm)
重量: 1.25 磅(0.56 千克)
條件: 僅可在 5°C 至 40°C 之間的干燥位置使用